Radio Trim for Kenwood eXcelon DMX906S in Honda Fit - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trim Pieces

Radio Trim for Kenwood eXcelon DMX906S in Honda Fit

0 downloads51 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

In the photo I printed I used PLA to test it quickly before installing, but DO NOT USE PLA to print this for yourself (it will soften in the car when it gets hot). Use PETG, or any material that will be okay with hot weather. I printed the final version (not in the photo) with PETG at 0.24 layer height. This was designed to fit the dimensions for a Kenwood eXcelon DMX906S in a 2012 Honda Fit.