Honda CRV 02-05 Rear Window Wiper Bridge - image

Files (1)

CRV_Wiper_Bridge.STL

STL

165.5 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

16g

Based on 25% main infill across listed model files

Material cost

$0.37

Filament only at roughly $24/kg PETG / ASA

Print time

27m–44m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
CRV_Wiper_Bridge.STL	Primary model	165.5 KB STL	14g $0.34	16g $0.37	34g $0.82	Ensure a brim or raft is used for stability if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trim Pieces

Honda CRV 02-05 Rear Window Wiper Bridge

0 downloads44 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a slide on trim piece for the rear window on a Honda CRV 2002-2005. This provide a smooth bridge for the wiper to pass over. Original Honda wiper blade carriers don't usually stick in the groove between the door and the glass, but aftermarket blade holders get stuck almost every time. This "bridge" solves this issue and protects your rear wiper from getting burnt out or broken and provides reliable rear window wiping.

Compatible Cars

Published Jun 27, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Eric Halpern (elhalpern) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.