Files (2)

i3_cup_holder_bottom.STL

STL

i3_cup_holder.STL

STL

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

50g

Based on 23% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 23%	100% solid	Recommendation
i3_cup_holder_bottom.STL	Mount / bracket	0 B STL	Slice file	Slice file	Slice file	Use 8-32 screws for assembly
i3_cup_holder.STL	Mount / bracket	0 B STL	Slice file	Slice file	Slice file	Use 8-32 screws for assembly

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Cup Holder for BMW vehicle

0 downloads506 views0 likes

Shared by

Michael Chen

Verified

Description

New design that has a height more equivalent to the OEM cup holder. It is also quite a bit less material (Almost an hour less printing for me). I also changed how the bottom and top interlock. It is meant to be tapped for 8-32 screws now. There is also a tab that is meant to be glued for more strength as well. (I still need to buy these screws so its not fully tested yet, but I'm confident it is a better design. Printed with 3 perimeters and an infill of 20% for the bottom and 25% for the top.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

BMW (all models)

Published Feb 6, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Toyota Tacoma

3.1K

License: CC BY

View & download STL files