Cup holder for Porsche 986/996 with Ashtray Delete - image

Files (2)

996_AD_Cupholder_Bottom_v7.stl

STL

128.6 KB

996_AD_Cupholder_Top_v6.stl

STL

155.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
996_AD_Cupholder_Bottom_v7.stl	Mount / bracket	128.6 KB STL	Slice file	Slice file	Slice file	Ensure a clean and level print bed for proper adhesion
996_AD_Cupholder_Top_v6.stl	Mount / bracket	155.7 KB STL	Slice file	Slice file	Slice file	Ensure a clean and level print bed for proper adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Cup holder for Porsche 986/996 with Ashtray Delete

0 downloads33 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Add a cup holder to a Porsche 996 or 986 that has the ashtray delete part installed. Pull up the rubber liner and remove the two screws. Place the bottom piece in position - it only fits one way. Replace the screws. Insert the top piece. Done. Easily reversible. As a plus, you can still use the little compartment for storage, however you'll need to find a safe place for the rubber liner as that will not fit with the cup holder in place.