Files (1)

BOXSTER_CUP_HOLDER_WITH_SUPPORT.stl

STL

30.2 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

10g

Based on 25% main infill across listed model files

Material cost

$0.23

Filament only at roughly $24/kg PETG / ASA

Print time

17m–28m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
BOXSTER_CUP_HOLDER_WITH_SUPPORT.stl	Mount / bracket	30.2 KB STL	9g $0.22	10g $0.23	21g $0.51	Ensure the print bed is level for proper adhesion and to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Porsche Boxster Cup Holder

13 downloads251 views0 likes

Need this part printed?

Tell us what you need and we'll help you get it 3D printed. Takes a minute — no account needed and no payment is collected.

Request print / quote

Opens a quick request form. No order is placed and no payment is collected. Prefer email? Email us instead.

Shared by

Alfred

Verified

Description

This is a remix of a great original design by trevorbattle. I have modified it with a center support that helps it sit level and not shift in the compartment. The lid still closes over it. It's easy to pull out and re-install. 124g of PLA, printed at.3mm and 25% infill..2 is a 10 hour job.3 is a little over 5 hours ANYCUBIC MEGA S.