Cup holder replacement for BMW Z4 E85 - image

Files (1)

CupHolder.stl

STL

312.1 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
CupHolder.stl	Mount / bracket	312.1 KB STL	46g $1.10	50g $1.20	110g $2.63	Print with support from buildplate only as instructed

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Cup holder replacement for BMW Z4 E85

0 downloads195 views0 likes

Shared by

Michael Chen

Verified

Description

The swiveling arm of the cupholder on my Z4 was broken, so I made a replacement part. Remove the unit from the car (there are tutorials online) and take out the broken piece. Replace with your print and re-install. If you need the arm on the left, simply mirror the part in your slicer. Print with support from buildplate only.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

BMW (all models)

Published Mar 8, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Toyota Tacoma

3.1K

License: CC BY

View & download STL files