Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| dokker_držák_mobilu.stl | Primary model | 702.2 KB STL | Slice file | Slice file | Slice file | Ensure proper fit around the radio and ventilation outlet |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Dacia Dokker mobile phone holder
Shared by
3DPrintedCarPartDescription
This is a mobile phone holder for Dacia cars. I bought the holder in KIK, but it will fit most with a ball mount... It is necessary to remove the plastic around the radio, take out the ventilation outlet (everything goes without tools and I recommend max plastic so that nothing is scratched) Put the parts together on that plastic and you're done... Some square nuts M3 and bolts of different lengths are needed.... Due to the temperatures in the vehicle, I recommend ABS.
Compatible Cars
Originally published on thingiverse.com by Jan Rottr (krtecek) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
