Dacia_adapter_front.stl

STL

13.2 MB

Dacia_adapter_front_part_1.stl

STL

6.9 MB

Dacia_adapter_front_part_2.stl

STL

5.6 MB

Dacia_adapter_rear.stl

STL

11.2 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

4 model files

Typical selected file

96g

Based on 25% main infill for the largest likely-needed model file

Material cost

$2.32

Filament only at roughly $24/kg PETG / ASA

Print time

2.7h–4.6h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Dacia_adapter_front.stl	Printable file	13.2 MB STL	89g $2.13	96g $2.32	212g $5.08	Ensure proper orientation for optimal strength and minimal supports
Dacia_adapter_front_part_1.stl	Printable file	6.9 MB STL	66g $1.58	72g $1.72	157g $3.76	Ensure proper orientation for optimal strength and minimal supports
Dacia_adapter_front_part_2.stl	Printable file	5.6 MB STL	60g $1.44	65g $1.56	143g $3.42	Ensure proper orientation for optimal strength and minimal supports
Dacia_adapter_rear.stl	Printable file	11.2 MB STL	82g $1.98	90g $2.15	196g $4.71	Ensure proper orientation for optimal strength and minimal supports