Dacia Logan / Sandero II Medianav cable holder / grabber

I designed these parts to create a neat routing for the USB cable intended for Dacia/Renault Medianav units. Their use is simple, the process is reversible and does not require any special parts (Torx T20 wrench, that`s all). How to print: Note that the orientation is not arbitrary, there is only one correct way to print the part (check which of the sides is completely planar, the other one has the hook a bit raised). How to mount: 1. Take Medianav grille off. There should be plenty of tutorials on the internet for that. Generally it works with bare hands but in some cases it might require some plastic cards/blades. 2. Take lower V-shaped plate off (the one holding the window buttons). Grab from the bottom and pull, or search for tutorials. 3. Place lower part on the cross-shaped section and reapply the cover. If possible, it`s recommended to put the cable in the hook before installing. 4. Undo the lower left screw from the Medianav and reinstall after installing the new bracket. The bracket was designed to be in line with the Medianav bracket but in practice it has a better position if rotated a bit clockwise. 5. Reinstall Medianav grille. 6. Enjoy! Notes: 1. The lower part is a bit flimsy (the top part tends to break easily). It`s recommended you strengthen it with a few drops of superglue in that area before applying. 2. These parts have been tested with the striped version of Medianav grille. The older style with the outer shoulder part might not work, i didn`t try.