DACIA Sandero III 2022 - Strut mounts cap Domlagerkappe - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 35%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

DACIA Sandero III 2022 - Strut mounts cap Domlagerkappe

0 downloads28 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Unfortunately the DACIA Sandero III does not have a cover on the strut mounts. To avoid damage from environmental influences, I designed the strut mounts caps. These fit tight on the rubber rings on the strut mounts and prevent penetrating of moisture. Since this is neither an object for decoration nor certain strength requirements are necessary, I simply printed the caps in draft mode with 0.3mm in PETG. ________________________________________________________________________ Der DACIA Sandero III hat leider keine Abdeckung auf den Domlagern. Um Schäden durch Umwelteinflüsse zu vermeiden, habe ich diese Domlagerkappen konstruiert. Diese sitzen fest auf den Gummiringen an den Domlagern und verhindern so das Eindringen von Nässe. Da es sich hier weder um einen Gegenstand zur Dekoration handelt, noch bestimmte Ansprüche an Festigkeit notwendig sind, habe ich diese Kappen lediglich im Draftmodus mit 0,3mm in PETG gedruckt.