Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| L276_Innenraumfilter.stl | Primary model | 66.9 KB STL | Slice file | Slice file | Slice file | Ensure a clean and dry print bed for optimal adhesion |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Daihatsu Mira / Cuore L276 Innenraumfilter Pollenfilter cabin air filter
Shared by
3DPrintedCarPartDescription
Since my Daihatsu Cuore(in some places called Mira) wasn't equipped with a pollenfilter, i buoght one and made this cover. This is what i did: 1. get an airfilter with the correct size. Size is roughly 176mm x 186mm x 30 i bought a "Filter, Innenraumluft - 1 987 432 173 BOSCH " for 10€ 2. Cut out the the space behind the glovebox. keep the cut out piece 3. insert the air filter 4. place some foam wrap around the cut out plastic part to airtighten it. then stick it back in place and cover it with the 3d printed part to hold it in place.
Compatible Cars
Originally published on thingiverse.com by Simon Rautenberg (metallsimon) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
