Files (2)

dmax__6_switch.stl

STL

260.4 KB

dmax_panel_blank.stl

STL

161.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
dmax__6_switch.stl	Printable file	260.4 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal printing
dmax_panel_blank.stl	Printable file	161.9 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Dmax switch panel

0 downloads65 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This a switch panel for dash on the lower right side its a bit rough but it works one STL takes 6 rockers switch of Jaycar link https://www.jaycar.com.au/spst-round-rocker-switch/p/SK0960 and other STL file is blank putt own holes in it.