Dodge Challenger > 2015 trunk trim - image

Files (7)

connector.stl

STL

17.9 KB

corner_left.stl

STL

188.7 KB

corner_right.stl

STL

187.9 KB

inner_left.stl

STL

40.3 KB

inner_right.stl

STL

45.4 KB

outer_left.stl

STL

56.3 KB

outer_right.stl

STL

57.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

7 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
connector.stl	Accessory piece	17.9 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
corner_left.stl	Choose left variant	188.7 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
corner_right.stl	Choose right variant	187.9 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
inner_left.stl	Choose left variant	40.3 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
inner_right.stl	Choose right variant	45.4 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
outer_left.stl	Choose left variant	56.3 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
outer_right.stl	Choose right variant	57.1 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trim Pieces

Dodge Challenger > 2015 trunk trim

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Upholstery in the trunk is hold to the back with a few push pins. At the corners there is some gaping. I like to keep the upholstery in good condition. This trim clamps onto the pushpins adding a edge and pushing the panel to the backside. I think this prevent it for damage.

Compatible Cars

Dodge Challenger

Published Jun 27, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by richard te pas (hendrik6073) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.