dodge ram 1st Gen Guage Cluster Trim Bezels - image

Files (3)

bezel_backing_plate.stl

STL

166.0 KB

button_bezle_trim.stl

STL

4.8 KB

whiper_bezel.stl

STL

4.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
bezel_backing_plate.stl	Printable file	166.0 KB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping
button_bezle_trim.stl	Accessory piece	4.8 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
whiper_bezel.stl	Accessory piece	4.8 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trim Pieces

dodge ram 1st Gen Guage Cluster Trim Bezels

0 downloads41 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

i printed at.12 on an Ender 3 the hole in the backing plate is 19mm for a push button start. if requested and i have time i can make one with a specific size for you.