Files (1)

van_door_handle_ptype_1.stl

STL

18.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
van_door_handle_ptype_1.stl	Primary model	18.8 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Handles

Door Handle 1992 Ford Van

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I bought an old 1992 Ford 350 Van that had no passenger side door handle on the inside. I just needed to have something to hold on to to close the door. So I measured it up, put it into Inventor and wrote out a stl file, then used slic3r to get a gcode file for my new Tevo Tarantula 3D printer. The first prototype worked great. Hope this helps anyone else that lost a door handle.:).