Files (3)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Truck_Radio_1_IMPORTED_v102.STL | Printable file | 169.8 KB STL | Slice file | Slice file | Slice file | Ensure proper bed adhesion to prevent warping |
| Truck_Radio_1_IMPORTED_v104.STL | Printable file | 168.4 KB STL | Slice file | Slice file | Slice file | Ensure proper bed adhesion to prevent warping |
| Truck_Radio_1_IMPORTED_v104__BACK-COVER.STL | Cover / cap | 154.2 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA; check sealing faces and verify in slicer, but likely needed for the full model with back cover. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Double Din to Single Din, Ford Ranger (REMIX)
Shared by
3DPrintedCarPartDescription
Rebuilt to increase all wall thickness to 1/16" (1.6mm). I'm working on a version which has the back cut out, so that you can print it vertical without a lot of support material; and then have a separate backing piece that you would glue in (print time difference is 5 hr vs. 10 hrs). Update 1 (10/10/2019): v102 is the full model with back cover. v104 is the open back, and the corresponding cover (glue in place).
Compatible Cars
Originally published on thingiverse.com by aTypical Engineer (aTypicalEngineer808) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
