Ford Ranger Floor Console Hold Down Fastener - image

Files (1)

Hold_Down.STL

STL

159.1 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

15g

Based on 25% main infill across listed model files

Material cost

$0.37

Filament only at roughly $24/kg PETG / ASA

Print time

26m–44m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Hold_Down.STL	Primary model	159.1 KB STL	14g $0.34	15g $0.37	34g $0.81	Ensure proper orientation for minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

Ford Ranger Floor Console Hold Down Fastener

0 downloads99 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a plastic part for a 2004 Ford Ranger. It is used to hold down the center floor console to the mounting plate on the transmission "hump". I broke mine trying to reinstall it, so I brought it in the house, measured it up, and made a replacement in Solidworks 2013. I believe this part could also be used in other Ford models such as Suburban, F150, Explorer, etc. If it looks like your part, it will probably fit. I have provided the Solidworks file to allow modifications.

Compatible Cars

Ford Ranger

Published Jul 4, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by David Evers (devers6) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.