Ford Ranger center console latch with base - image

Files (1)

Ranger_Latch_with_base.stl

STL

13.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Ranger_Latch_with_base.stl	Primary model	13.9 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

Ford Ranger center console latch with base

0 downloads28 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Summary This is a remix of the latch uploaded by Fox50, on my truck a chunk of plastic broke out along with the latch so his design wouldnt quite work for what I needed. I added the plastic base, figured I could just epoxy it in under the lid. Printed with no supports on the initial run but did have some problems with the lip, so if you have problems try supports on that one area.