Files (2)

stojan_1.stl

STL

122.0 KB

stojan_2.stl

STL

134.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
stojan_1.stl	Printable file	122.0 KB STL	Slice file	Slice file	Slice file	Check the final orientation and support settings in your slicer before printing.
stojan_2.stl	Printable file	134.8 KB STL	Slice file	Slice file	Slice file	Check the final orientation and support settings in your slicer before printing.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

držák tabletu

0 downloads34 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

DRŽÁK TABLETU Uchopení za opěrku hlavy spolujezdce, nebo řidiče. tisknuto s podporami, tryska 0,4mm nastavení 0,1 DETAIL k sestavení stačí pouze M3 x 15mm + matka Tablet lze snadno založit i vyndat. Držák má i otvor na nabíjení.