support.STL

STL

31.5 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

10g

Based on 25% main infill across listed model files

Material cost

$0.24

Filament only at roughly $24/kg ABS / ASA

Print time

17m–28m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	ABS / ASA 20%	ABS / ASA 25%	100% solid	Recommendation
support.STL	Primary model	31.5 KB STL	9g $0.22	10g $0.24	22g $0.52	Ensure proper orientation for minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

DS4 camera mount (180° version)

0 downloads41 views0 likes

Shared by

Verified

Description

Adapter plate to mount the 180° reverse camera on a DS4 witch use a 130° as standard. Print with ABS as PLA may be limited regarding high temperature The camera is glued to the adapter plate. The original mount (OEM) use two M2.5 screws, so you need to M2.5 inserts (In my case I used M2 with new screws because I did not have the M2.5 inserts) For electrical connection and activation read this post on forum Peugeot: https://www.forum-peugeot.com/Forum/threads/tuto-remplacer-la-cam%C3%A9ra-de-recul-130%C2%B0-par-la-cam%C3%A9ra-panoramique-180%C2%B0-visiopark-1-sur-308.111402/

Published Jun 27, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by (Nico108078) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.