Escort / Beltronics radar detector mount - image

Files (2)

radar_visor_v1_1a.stl

STL

70.0 KB

radar_visor_v2a.stl

STL

1.0 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
radar_visor_v1_1a.stl	Printable file	70.0 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to prevent warping, especially with PETG
radar_visor_v2a.stl	Printable file	1.0 MB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to prevent warping, especially with PETG

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Escort / Beltronics radar detector mount

0 downloads51 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Mount for Escort / Beltronics radar detectors with the mag mount type. Should work with others as-is (check dimensions) or just remix it. I made this to mount detector on visor of 2006 Mini Cooper S. 2 versions one plain for using velcro or the like, another with slits to use elastic bands, velcro type wire wraps, etc to hold on visor or wherever you use it. Shouldn't need supports but depends on how your printer does small bridges. printed on my old original Creality CR-10 just fine.