Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Fire_Holder_2.stl | Mount / bracket | 36.8 KB STL | Slice file | Slice file | Slice file | Ensure a secure fit on the center console to prevent movement during driving. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Extinguisher mount
Shared by
3DPrintedCarPartDescription
This time of year in Florida there are car shows every weekend (yes, car shows in March:-). At the judged shows they give you an extra point if you have a Fire Extinguisher with your car. Some guys have the extinguisher sitting on the front seat, some put them on the ground in front of the car, some put them in the trunk. Easy to see these folks don't have a 3D printer. I found a small auto rated extinguisher at Home Depot and made up a couple brackets to temporarily hang it on the center console of my Challenger. I mounted the bracket that came with the extinguisher to my brackets with a couple #10 screws and nuts and I put it in place after arriving at the show. After the show I stow it in the trunk. Please Note! This is temporary and just for the car show. It stays in place nice on my Challenger and does not slide around once in place, but you can't guarantee it will not move around under driving conditions.
Compatible Cars
Originally published on thingiverse.com by Dutch Bailey (vsp4dutchb) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
