Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ASA / PETG 20%	ASA / PETG 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

F-150 Emblem 2017

0 downloads31 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is an F-150 emblem as it comes on a 2017 model. I've provided several different STL files. The first is the entire emblem and base as a single model. Then there are two split files to support two color printing; frst print the base, then change filament and print the letters. I've offset the letters in Z so they will print right on top of the previously printed base, starting at the next layer height.