Files (1)

bottle.stl

STL

8.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 40%	100% solid	Recommendation
bottle.stl	Primary model	8.5 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Vents

F150 a/c vent bottle holder

0 downloads38 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I have a 2019 Ford F150. There is a power port under one of the air vents. If you flip the door open it can become a little shelf to hold a water bottle in front of the air vent. I designed this bracket to hold the little door up so it becomes a shelf. If you accelerate fast then the bottle will fall. There are some little print helpers on the upside down vent latches. Trim away post print. Printed in ABS,.2 layer, 50% infill.