gen. 5 Ford Mustang Dashboard-AC Vent Joint Replacement - image

Files (1)

AC_Hinge_v2.stl

STL

121.8 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

14g

Based on 25% main infill across listed model files

Material cost

$0.34

Filament only at roughly $24/kg PETG / ASA

Print time

24m–40m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
AC_Hinge_v2.stl	Primary model	121.8 KB STL	13g $0.31	14g $0.34	31g $0.74	Ensure proper orientation for optimal strength and snap-fit functionality

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Vents

gen. 5 Ford Mustang Dashboard-AC Vent Joint Replacement

2 downloads83 views0 likes

Shared by

Alfred

Verified

Description

This is a small part meant for the Generation 5 mustang dashboard AC vents. It holds both lids together and helps keep the AC vent open. The part simply snaps into place in the AC vent lids. The vent lids have a back support bar, with cut outs, which make room for the vent joint. There are also two holes on bars behind each lid that are perpendicular to the lids, in which the buckles snap into place.

Compatible Cars

Ford Mustang

Published Jun 27, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by JO CO (MJBacklash) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.