Ford air vent - ranger explorer sport trac - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ABS 20%	PETG / ABS 35%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Vents

Ford air vent - ranger explorer sport trac

0 downloads37 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

after seeing several people selling these, offering only to print their designs, no customization, etc. without an upcharge that just seemed not worth it.... I took a factory vent and drew it up in cad, this is a car interior part, and should be printed in ABS or PETG, low layer heights for a good quality print and less layer lines. this is a besic vent with no side to side air direction, intended to be cusomized by the end user. such as a gauge pod or control, or digital display ill continue to update this set of files as i create variations if you liked this feel free to donate for my time paypal.me/josephmhayden.