Files (1)

F150_Air_Vent_Bottle_Holder.stl

STL

89.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ASA / ABS 20%	ASA / ABS 25%	100% solid	Recommendation
F150_Air_Vent_Bottle_Holder.stl	Mount / bracket	89.6 KB STL	Slice file	Slice file	Slice file	Ensure proper ventilation in the print area to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Vents

F150 Air Vent Bottle Holder

0 downloads53 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I often leave a partial bottle of water in the truck and it gets warm/hot here in the Southern California temperatures. Sometimes the warm/hot water is all I have. So I made a bottle holder that fits in the air vent louvers that allows cold air to blow across the bottle and cool the contents. YES, it works. You may be surprised by the change in temperature. You may be able to fit a canned beverage in it. 7-27-2018 updated.stl file to new design that re-enforces the arms. 7-30-2018 WARNING PLA+ does not withstand the heat of the closed cab. My holder with a half bottle of water in it became mishaped and bent from the heat buidup in the cab ( from sitting all day without windshield screen). I will try using ABS and see if it holds up better.