Files (1)

F150_Rear_Seat_Handle_Pull.stl

STL

94.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
F150_Rear_Seat_Handle_Pull.stl	Primary model	94.0 KB STL	Slice file	Slice file	Slice file	Use a layer height of 0.2-0.28mm for optimal print quality

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

F150 Rear Seat Pull Handle

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a pull handle for the driver's side rear seat on the F150. Print.2-.28 layer height with PETG or ABS filament. Overture PETG has held up just fine with no warping, It is a press fit onto the rear seat latch tab so a small pair of pliers will be needed. Once pressed on it will rotate on the pin release tab easily.

Compatible Cars

Ford F 150

Published Jun 27, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Bret Flemmons (PorpoiseHork) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.