Fiat 500 Din1 Cover / Blende (Joying) - image

Files (1)

Fiat_500_Radio_Cover.stl

STL

45.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Fiat_500_Radio_Cover.stl	Cover / cap	45.6 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Fiat 500 Din1 Cover / Blende (Joying)

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Fiat 500 radio cover for aftermarket radios in Din 1 size. The original radio of Fiat 500 is having crazy dimensions so if u switch to an aftermarket radio like mine (Joying 8.4") u´ll have the problem that the new radio doesnt cover the whole radio shaft so i made this design to cover what u shouldnt see. U can also buy one of these but hey why we have an 3D Printer:D Thanks, Enjoy! ps: print the cover with front down to buld plate Print in ASA or PETG Aflter printing top sides u should sand and paint the whole printed part, maybe better than i did.