Fiat Steering Column Cover Repair - image

Files (1)

Fiat_500_Steering_Cover_Screw_Fix_v3.stl

STL

234.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Fiat_500_Steering_Cover_Screw_Fix_v3.stl	Cover / cap	234.1 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and supports unlikely.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Fiat Steering Column Cover Repair

0 downloads45 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Someone overtightened the screws that hold the cover on the steering on my Fiat 500e. I made these inserts to add some strength. You could probably get away with something weaker/lighter, but this is hardly a weight driver. Flip over, print without supports, push the rings over the top and the finned cones in the middle. Be sure and align the cones' fins, you may here a little click as they lock home.