Fiat 500 RAM Adapter for GPS Mount - image

Files (2)

Fiat500_mount_v1.stl

STL

1.3 MB

Fiat500_mount_v2.stl

STL

1.4 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Typical selected file

35g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.85

Filament only at roughly $24/kg PETG / ASA

Print time

1.0h–1.7h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Fiat500_mount_v1.stl	Mount / bracket	1.3 MB STL	31g $0.75	34g $0.81	74g $1.78	Ensure proper orientation for minimal supports
Fiat500_mount_v2.stl	Mount / bracket	1.4 MB STL	33g $0.78	35g $0.85	77g $1.86	Ensure proper orientation for minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Fiat 500 RAM Adapter for GPS Mount

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Use the TomTom GPS mount location in older Fiat 500's with the RAM mounting system. Attach a 1in RAM ball with two 6mm hex bolts. V2 adds an optional 8mm hex bolt to strengthen the center.