Fiat Panda old verision (until 2004) ashtray - image

Files (3)

Cover.stl

STL

1.8 KB

Left.stl

STL

65.9 KB

Right.stl

STL

65.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Cover.stl	Cover / cap	1.8 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Left.stl	Choose left variant	65.9 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
Right.stl	Choose right variant	65.9 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Fiat Panda old verision (until 2004) ashtray

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

My version of Fiat Panda ashtray Main parts (right and left) are made of PETG, cover is made by PLA. In next version i want to make a couple of improvements but at this moment is fully working! Be careful mounting inside the car. You must be delicate to not break the rear part. Enjoy and if you like it, offer me a coffee for my work;).