Files (3)

Holder.stl

STL

184.7 KB

LeftPin.stl

STL

57.0 KB

RightPin.stl

STL

191.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Holder.stl	Mount / bracket	184.7 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing and minimal support material
LeftPin.stl	Choose left variant	57.0 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
RightPin.stl	Choose right variant	191.0 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Sun Visor Fiat Panda 169

0 downloads52 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I made this to replace a stock sun visor of a Fiat Panda model 169. It is the right sun visor (passenger seat). I printed it using PLA for proof-of-concept purposes. However it works pretty well. The detachable part of the visor was completely broken in the original one so I designed a small part (LeftPin) that fits properly. The rotating part is designed in two parts: Holder and RightPin. The latter must be mounted on the holder by using a screw that must not be so tight, since the pin must rotate. The assembly holder and right pin must then be inserted on the visor and then everything must be mounted on the ceiling of the car.