FIAT Spider Front 6.5" Speaker Adapter - image

Files (1)

fiat_front_6.5_speaker_adapter.stl

STL

2.2 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
fiat_front_6.5_speaker_adapter.stl	Primary model	2.2 MB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the build plate to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Panels

FIAT Spider Front 6.5" Speaker Adapter

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

You'll have to delete your map pockets. No need to cut the metal body to increase speaker hole diameter, but I did do this on the plastic panel. I used foam weatherstrip tape between all layers, and to shape / adapt the larger hole from this part to the smaller hole in the metal.