Fiat X1/9 Speedo Tach Gauge Needle - image

Files (1)

x19_needle.stl

STL

49.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 40%	100% solid	Recommendation
x19_needle.stl	Primary model	49.2 KB STL	Slice file	Slice file	Slice file	Ensure a clean and stable printing surface to avoid warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Fiat X1/9 Speedo Tach Gauge Needle

0 downloads39 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

X1/9 needles tend to warp, you can get the white bit off by picking at the "pins" on the backside with an exacto or something sharp, a drop of super glue will put this one on, my printer skills aren't very good, maybe try PLA or nylon or something, my ABS prints aren't so great but anyway, there ya go. it snapped in the black holder pretty decent. I had pink filament loaded. YMMV.