Fixed USB-C Center for the USB Tesla Charger - image

Files (2)

Gray_Base_fixed_USB-C.stl

STL

537.1 KB

Red_Center_USBc.stl

STL

178.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Gray_Base_fixed_USB-C.stl	Printable file	537.1 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for optimal print quality
Red_Center_USBc.stl	Printable file	178.1 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for optimal print quality

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Fixed USB-C Center for the USB Tesla Charger

0 downloads29 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

swholmstead's model is fantastic, but their Red Center piece for USB-C cables is not usable right now. The large opening that the entire cable needs to fit through, is too narrow for many usb-c cables. And the 'charger holder' is way too large and wont hold the usb cable in place when you arent charging. This remix fixes those two issues. It now securely holds the usb-c cable in place, and I enlarged the other opening to allow most cables to pass through it. Also enlarged the opening in the "grey_base" to 13mm so that it will fit most usb-c cables now. If you need the model modified in any way for your specific USB-C cables let me know and I can probably make the needed changes. Happy printing everyone!