Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Ford A/C control knob

0 downloads37 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is a replacement temperature control knob for the A/C unit in a 2000 Ford F150. It should work on other years and models that use the same A/C control panel. I did not add a hole for the panel light, but the underside of the knob has half of the supports needed to add the light guide if you so desire to finish designing it in. I did not want to spend much time with this model, as it's only a stop-gap while waiting on an OEM replacement. This model was built in 3ds max 7.0 in about 2 hours.