Files (2)

Van_4_AC_Control_Nob_V4.stl

STL

336.8 KB

Van_AC_knob_V2.3mf

3MF

251.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Van_4_AC_Control_Nob_V4.stl	Printable file	336.8 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping
Van_AC_knob_V2.3mf	Printable file	251.5 KB 3MF	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Ford AC Control Knob

0 downloads27 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I broke the original knob in my ford work van and just out of necessity built another, I hope this helps someone else. if you do end up using this please let me know I would love to know it wasn't such a waste of time. Also sorry its not quite finished I was new to 3D printing at the time and it worked so I never ended up fixing it. if anyone has a request for modifications please let me know I would be happy to help.