Files (1)

Ford_Oval_7in_v2.stl

STL

3.8 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Ford_Oval_7in_v2.stl	Primary model	3.8 MB STL	Slice file	Slice file	Slice file	Scale the model as needed for different badge sizes

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Ford Blue Oval Badge

0 downloads29 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Wanted to experiment with making a replacement badge for my 2018 Ford Explorer. I couldn't find any existing projects that seemed to emulate the real badges, so I made this one. This is a 7" wide badge meant for the rear hatch, but should be scalable to any size. I plan to measure and upload the front grille badge (9") too after I print that one. I printed it with the unmodified Dynamic print profile in Cura with 10% Cubic infill on my Ender 3 v2. Total print time was 06:20, the Dynamic profile works really great but is super slow... I plan to sand the finished result and maybe paint it, I'm not sure how the PLA will hold up to the elements but should be fun to see! I'll update with some pics once I get it on the truck.