Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| ford_hood_pin_clip.STL | Clip | 1.5 MB STL | Slice file | Slice file | Slice file | Print with the clip's base flat to ensure stability |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Ford bonnet prop clip for 7x7 mm hole (fits ford puma and more)
Shared by
3DPrintedCarPartDescription
Ford bonnet/hood prop clip Fits a 7,2x7,2mm square hole It was made for a Ford Puma - 98 but probably fits alot of other models too. print solid on it's side. no supports or anything needed. ~15 min print.
Compatible Cars
Originally published on thingiverse.com by Mi Blah (Bilbull) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Ford Fiesta MK7 JA8 Engine hoods holder
License: CC BY
View & download STL files
Ford Shaker Hood Plug
Ford
License: CC BY-NC
View STL source
Slimmer Fox Body Ford Mustang hood prop retaining clip
License: CC BY
View & download STL files
Ford Ka 2001 Hood Rod Clip Support
License: CC BY
View & download STL files
Ford Fiesta MK5 Facelift Hood holder clip
License: CC BY
View & download STL files
BMW X5 E70 Center Console Blind Plate
BMW
License: CC BY
View & download STL files
