Ford Expedition Exterior Badge - Gen1 (1997-2002) - image

Files (2)

EXPEDGEN1.stl

STL

1.3 MB

EXPGEN1PINS.stl

STL

43.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ASA / PETG 20%	ASA / PETG 25%	100% solid	Recommendation
EXPEDGEN1.stl	Printable file	1.3 MB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to prevent warping
EXPGEN1PINS.stl	Printable file	43.0 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Ford Expedition Exterior Badge - Gen1 (1997-2002)

0 downloads38 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This badge is for the Generation 1 Ford Expedition. The only thing about it that designates it as "For an Expedition" is the hole placements for the pins. The pins are separate files (you may need to adjust the diameters depending on your print settings.