Files (5)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| 2nd_Tier_-_pen_tray.stl | Accessory piece | 19.9 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
| 3rd_Tier_-_part_1.stl | Printable file | 36.9 KB STL | Slice file | Slice file | Slice file | Ensure proper ventilation when printing with PETG or ASA |
| 2nd_Tier_-_part_1.stl | Accessory piece | 19.0 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
| 1st_Tier_-_part_2.stl | Accessory piece | 9.5 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
| 1st_Tier_-_part_1.stl | Accessory piece | 7.3 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Ford Explore Console Organizer - Three Tiered
Shared by
Michael ChenDescription
This is a design for a 2013 Ford Explorer center console organizer. The Explorer center console is a large space with no organization. Something goes in, it is impossible to find. The design is organized into three tiers. This is a three tier design with each tier resting on the other. The bottom tier is made up of 2 basic boxes that can store larger items. The second tier is made up of two boxes. One simple box and the other is setup with dividers. This box is divided up to hold pens, small flashlights, and credit cards items. there is also a pen tray that can be removed and replaced. The top tier is design to hold coins and other smaller items and an area to put your cell phone. Since the inside of a car is a hot environment these parts were printed in ABS. I first printed in PLA but heat from a black interior of the truck cause the PLA to become soft and deform.
Print Settings
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
