Files (1)

Exploder_Badge.stl

STL

187.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Exploder_Badge.stl	Primary model	187.1 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Ford Explorer 'Exploder' Badge

0 downloads25 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Simple badge for my Ford Explorer that most people refer to as the 'Exploder'. I recommend coating this with a hard paint like a truck bed liner to prevent it from warping in the sun. Paint either the upper or lower parts of the lettering to make them appear readable at a distance. The 'EX' and 'PLODER' will likely separate, there isn't much making contact to hold it together.