Ford F-150, Super Duty, Expedition Center Console Gridfinity Organizer preview

Files (1)

Gridfinity baseplate 2x3.stl

STL

237.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Gridfinity baseplate 2x3.stl	Primary model	237.8 KB STL	Slice file	Slice file	Slice file	Ensure a clean and level print bed for optimal adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Ford F-150, Super Duty, Expedition Center Console Gridfinity Organizer

0 downloads14 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

1 hosted model file

STL

Material

PETG or ASA

Print time

Slice to calculate

Filament

Slice to calculate

Supports

verify in slicer

Infill

20-30% infill for durability

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

Public Domain

Commercial use allowed

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

This is a gridfinity compatible center console organizer for the following Ford trucks and SUVs: 2015-2020 F-150 2017+ Super Duty (F-250 - F-550) 2018+ Expedition This model uses the standard gridfinity pattern to fit in the bottom of the center console to help organize your storage compartment. This model comes with lids so you can place things on top of the storage system, ensuring you maximize your storage capacity. I also used magnets for this model (maybe a little over kill) to keep the bins on the baseplate, but it will work fine if you don't insert magnets. I like to keep certain medicines in my truck but don't need them that often so I wanted a system that I could keep them organized and out of the way, but still easily accessible if needed.