Files (1)

truck_hole_plug_1-17-19.stl

STL

134.0 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

15g

Based on 25% main infill across listed model files

Material cost

$0.35

Filament only at roughly $24/kg PETG / ASA

Print time

25m–41m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
truck_hole_plug_1-17-19.stl	Primary model	134.0 KB STL	13g $0.32	15g $0.35	32g $0.77	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Ford F150 Turbo weep hole plug

0 downloads75 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

If your F150 Turbo has frequent misfires you may need to drill a small hole about 1/16" to drain the water, oil, and dirt. This plug will fit into the 1/16" hole that you made in the Inter-cooler. See attached video. https://www.youtube.com/watch?v=kKgI5pnD_3E We drained the inter-cooler for about a week in two holes and used these plugs when we were satisfied that is was all drained. The performance of the vehicle improved drastically.

Compatible Cars

Ford F 150

Published Jul 1, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by thom ewry (thumperbunny) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.