Ford Master Cylinder Gasket/Bladder Spacer - image

Files (1)

Ford_Master_Cylinder_Spacer.stl

STL

33.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 40%	100% solid	Recommendation
Ford_Master_Cylinder_Spacer.stl	Primary model	33.5 KB STL	Slice file	Slice file	Slice file	Increase nozzle to bed gap for PETG, roughly double the gap used for PLA

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Ford Master Cylinder Gasket/Bladder Spacer

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I have a 1977 Ford F-150 4x4, I have put 3 brake master cylinders on it. The last 2 have leaked. This spacer should go under the cap and lay on the gasket/bladder not against the master cylinder. PETG is stable with DOT3 brake fluid.(see chart attachment) The only trick to printing with PETG is to double your gap between the nozzle and bed. If you use one sheet of paper for PLA use 2 for PETG. Update: 6-8-2018 This spacer cured my weeping mastercyclinder the outside is now bone dry.