Ford Falcon A/C Vent Direction knob - image

Files (1)

Falcon_Vent_Knob-2.stl

STL

84.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Falcon_Vent_Knob-2.stl	Primary model	84.3 KB STL	Slice file	Slice file	Slice file	Print with the knob standing upright as shown in the photo for best results

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Ford Falcon A/C Vent Direction knob

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This knob is for setting the direction of the A/C in a 1998 Ford Falcon Sapphire, don't know for sure if this will fit other falcons from the same time period or not. Print standing the right way up like in the photo for best looking results. After printing I just painted it grey and a white stripe on the correct end to make it as close as I could to the original. EDIT: I've made the grip of the knob taller like the original knob, making it easier to turn and also added an indent mark to indicate which direction the vent is pointing.