
Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| ford_fiesta_rear_lights_hand_screw_adapter_short_19mm.STL | Printable file | 3.2 MB STL | Slice file | Slice file | Slice file | Ensure a strong adhesion to the print bed to prevent warping |
| ford_fiesta_rear_lights_hand_screw_adapter_short_21mm.STL | Printable file | 4.0 MB STL | Slice file | Slice file | Slice file | Ensure a strong adhesion to the print bed to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Ford Fiesta mk5 mk6 read lights handscrew adapter
Shared by
3DPrintedCarPartDescription
I had recently to change the break light bulb of a Ford Fiesta mk5. It had a stuck hand screw that was impossible to turn by hand. This is an adapter in case you are in the same situation. It's a good idea to use some anti seize spray in the bolt. I uploaded 2 versions 19 millimeters one, and 21 millimeters one. I liked the 19mm more.
Compatible Cars
Originally published on thingiverse.com by Dimitris Bogas (EpicHardware) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.

