Led Spot Light Mount Ford Fiesta - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

Led Spot Light Mount Ford Fiesta

0 downloads39 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Hinge mount for additional light. used to fix a led spot light behind a Ford Fiesta forward grid (the upper one in the bumper) where the honeycomb mesh has been cut. the mount is fixed with 2 screws on the predrilled holes and tied with the 2 additional hookes on the ring into little holess placed in the nearby grid plastic. The led light used has a D=115mm, hige screw hole of 7mm inclined of 30°Deg from fron plate.