Ford Focus C-Max 18" alloy wheel center cap - image

Files (1)

ford_wheel_center.STL

STL

477.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
ford_wheel_center.STL	Primary model	477.2 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Ford Focus C-Max 18" alloy wheel center cap

0 downloads29 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I lost the wheel center cap off my car, so I thought why not 3d print it? I printed it with supports, which were a bit pain in the a$$ to remove, but after that the part just clicks in place. For the badge I used a cheap cheesy chinese 55mm one from ebay.